Monday, 27 February 2012

What do system beeps Mean?

One Beep RAM refresh failure
This may be due to
- Bad memory chips
- A bad DMA Chip
- Bad memory addressing chips on the motherboard

Two Beeps :Parity error or Parity Circuit failure
-Your memory may not be seated properly on the mother board.-Unplug and plug it properly

Three Beeps :Bad memory or bad mother board

Four beeps :Timer failure in the RAM.

Five Beeps :CPU chip may be dead

Six Beeps :Keyboard controller may have failed

Seven beeps :CPU is dead. Retry the connections and test.
-Replace the whole motherboard.

Eight Beeps :Video card is missing or Bad.

Nine Beeps amaged ROM BIOS.
-BIOS chip has to be replaced if it persists.

Ten Beeps :CMOS shutdown.
-Replace CMOS memory and associated chips.

Eleven Beeps :Cache memory test has failed.
-To enable cache memory try CTRL+ALT+SHIFT++.

One long Beep and Three short Beeps:Memory failure

One long Beep and Eight short Beeps :Video card failure.
-Try to install video card in another slot.

No Beeps :Check Power supply
-Check mother board connections
-Remove all cards except video card and check for system power up
-Insert all cards one at a time and check their operation.
-If system hangs on the installation of a particular card, then it is the cause for the problem and replace it with another of that type and
check

YOUR REPLIES ARE MY STRENGTH TO POST MORE TIPS AND TRICKS

No comments:

Post a Comment